hammered effect metallic lacquer.

Direct to metal application.

Its highly aesthetic shiny texture perfectly conceals surface imperfections.

Quick drying, high adhesion hardness and weather resistance.

for doors, lamps, grilles, railings, furniture, machinery and all iron elements

Application :

On iron and steel: directly apply 2 coats of product

At the spray gun: dilute according to the nozzle and the is with the universal thinners

Brush neat or lightly thinned 5-10% with Thinner.

it is recommended not to iron too much in the same place so as not to break the hammering effect

Surface repair:

on unpainted surfaces: sand, clean and remove dust, grease, oil, waxes and small imperfections. Completely remove rust and lamination residues by sanding, scraping or shot-blasting.

on previously painted surfaces: remove paint in poor condition and proceed as on unpainted surfaces.

manual:

- Shake the jar well before use

- apply in a well-ventilated area

- apply the ideal thickness (30-40 microns dry per layer)

Physical and chemical resistance

dry layer thickness 30-40 microns

100% adhesion to iron